Inhibitive Submasters - Group Masters

In Magic Q you can make a playback act as a "Master" for several things. Playbacks can be set to be an Intensity master for select fixtures, Size Master, Speed Master, Group Intensity master, and Intensity master to 200%

Select Fixtures Intensity Master:

with a clear Programmer, Select the fixtures you would like the Intensity master to effect.
Give the Fixtures just an Intensity value, IE @Full
Press "Record" and Choose an empty playback
Triple Tap the "S Button for that playback
Go to the "Function" tab
and set "Cuestack Is an Intensity Master" to "YES"
You should now see the playback it created has an "IM" after the PB# indicating it is an Intensity Master.

Size Master:

with a clear Programmer, Select the fixtures you would like the Intensity master to effect.
Modify the Attributes you would like to have the Size Master control, IE for Pan/Tilt choose a position
Be sure that ONLY the attributes you want to control the size of are in the programmer
Press "Record" and Choose an empty playback
Triple Tap the "S" button for that playback,
Go to the "Function" tab
and set "Cue stack Is an Size Master" to "YES"
You should now see the playback it created has an "SZM" after the PB# indicating it is an Intensity Master.

Speed Master:

with a clear Programmer, Select the fixtures you would like the Intensity master to effect.
Modify the Attributes you would like to have the Size Master control, IE for Pan/Tilt choose a position
Be sure that ONLY the attributes you want to control the size of are in the programmer
Press "Record" and Choose an empty playback
Triple Tap the "S" button for that playback,
Go to the "Function" tab
and set "Cue stack Is an Speed Master" to "YES"
You should now see the playback it created has an "SPM" after the PB# indicating it is an Intensity Master.

Group Intensity Master:

with a clear Programmer, Select the Group you would like the Intensity master to effect.
Leave the Programmer clear so only the fixtures are selected
Press "Record" and Choose an empty playback
You should now see the playback it created has an "IM" after the PB# indicating it is an Intensity Master.
This will also name the playback as "GM" then the name of that group

Group Size and Speed Masters & Group:

Once you create a Group master using the steps above, you can modify that into a Group size or speed master using the steps below.
Triple Tap the "S" button for that playback,
Go to the "Function" tab
and set the playback as a Size or Speed master as outlined above
then set "Cue Stack is an Intensity Master" to "NO"
the "Group Attributes" field should now say "ALL"

You can use this Field to choose what Attribute set the master effects

You should now see the playback it created has an "SPM" or "SZM" after the PB# indicating it is Size or Speed Master

Intensity Master to 200%:

This option can be used to over size the intensity of a master, this can allow you to override Intensity FX by Maxing out the intensity channel to 200% it's actual value