QuickQ Rack - Unboxing and Setting Up

STOP: Don't throw away the paper with the QR code on it

There are two ways to set up the rack:

• Use the Remote app via inbuilt WIFI
• Connect an external monitor, keyboard and mouse.

Remote app via inbuilt WIFI

1. Screw the antenna in the connector on the back of the rack.
2. Turn on the WIFI (it ships with it off).
3. Install QuickQ Remote to your tablet or phone from your device's Appstore.
4. Open the app and use the button "QR Code".
5. Program your rack.....See the manual and the videos on our website.

Connect an external monitor, keyboard and mouse

1. Connect an external monitor, keyboard and mouse.
2. Power on the monitor.
3. Then, power on the console or turn it off and back on again.

So how do I get a copy of the QR Code?

1. Use the Connect an external monitor section above, then:
2. Use the mouse to select the "A" from the top menu bar.
3. Insert a USB stick into the console (formatted FAT32, 16GB or less)
4. Click the Save to USB below the QR code on the screen.
5. Print the PDF file generated.